High-quality look
Integrate perfectly into the vehicle design
Modern and simple design
Visual highlight
Plug & Play mounting

Increased safety due to extremely bright flashing light
Small design: width approx. 20 mm, length approx. 73 mm
Contains 2 LED turn signals

Substantial weight saving
More torqueIncreased performance
More usable speed range
Better power delivery
Improved handling overall due to finer dosing capacity on the throttle grip
Sensitive response
Rich sound
Manifold routing optimally adapted to the production engine
Complies with current AMA noise regulations
Constructed completely from lightweight, high-grade titanium, this system offers a weight saving of 23.8 % (0.9 kg) over the stock exhaust.Gasgas: To install the silencer, the stock mounting parts must be overtaken.

ATTENTION: When used on EU models from MY26 and US models from MY26 FACTORY EDITION / MY27 Standard, the air box and air filter must be reverted to MY25. The correct engine mapping must also be installed. Vehicles in this configuration no longer comply with the 109 dB FIM noise limit.

CNC milled from high-strength aluminum
Elegant anodised surface
Includes drilling for safety wire

Made of high-strength aluminum
Elegant anodised surface
Pure race feeling
The right combination of look, style, and performance
Secure grip due to knurling

Lightweight material
Visual highlight with technical and ergonomic added value
Perfectly integrated into the motorcycle
Safe and comfortable grip
More comfort and safety for the passenger

Weight saving compared to series components
Extremely light
Made of high-quality carbon
Highest quality workmanship
Visual highlight
Perfect for changing the look of your motorcycle
Silk matte surface

Perfect protection for your radiator
Provides maximum protection at the lowest possible weight
High-quality look
Optimal protection against stone impact
Perfectly integrated into the motorcycle
Perfect fit

Specially developed for use in motocross
Silencer housing made of high-grade aluminum
Stainless steel silencer cap
Rich sound
Permanently welded brackets
Easy to mount
Reduced weight

For a system with optimized performance and perfect balance we recommend the combination with the FMF Fatty expansion chamber.

Excellent weather protection
Maximum protection against falls, flying stones, branches, etc.
Indispensable companion for heavy off-road and Supermoto use
Wide, generous design in combination with sturdy aluminum bracket
Prevents broken levers
Made of robust plastic

Secure stand for your bike
Specifically for soft surfaces such as sand

Friction optimized components
Optimized WP Pro Components setting
Separate high and low-speed compression damping
Optimal oil circulation
Improved damping behavior
Adjustable spring preload
Adjustable high-speed compression damping
Adjustable low-speed compression damping
Adjustable rebound damping

Scope of delivery
Shock absorber incl. 95 N/mm shock spring
Sticker

Notes

Shock length: 380mm
Stroke: 87,5mm

When mounting on KTM 790/890 Adventure brake hose 63542103000 and side stand 63503423000C1 are also required. When mounting on Husqvarna Norden 901 side stand 63503423000C1 is required.

Front brake disc 300mm

No fading
Consistent, high-level braking performance
Perfect dosing capacity
Greater safety in all conditions
Floating
No distortion
No brake juddering
Clear pressure point across the entire temperature range
Inner ring anodised
Outer ring made of stainless high-performance brake steel
Less manual force with the same brake power
Pure race feeling
Developed for use on the race track

CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight with technical and ergonomic added value
Adjustable grip width
Adjustable lever length
Flaps removed on ground contact
Prevents broken levers
Extremely light

CNC milled from high-strength aluminum
Elegant anodised surface

Increases the volume of the rear master cylinder
Additional cooling ribs minimise the heating of the brake fluid
Eliminates “fading” almost completely

Total height including cover approximately 26,5 mm

Optimum manifold guidance
Greater performance due to special engine mapping
Great sound
Uncompromising race look
Manufactured entirely from high-grade titanium
Complies with current FIM noise regulations
Better response
Significantly more torque
Substantial weight saving
Developed for use on the race track
High-quality look
Highest quality workmanship
The weight of the Akrapovič „Evolution Line" exhaust system is just 4.6 kg.
Compared to the standard exhaust system it offers a weight saving of 5 kg!
The power gets increased to 135 hp.
The torque gets increased to 106 Nm.
Noise level of this exhaust system: 102,5 dB(A)
Static noise measurement like performed on race tracks (at 5.000 rpm)
The Akrapovič-kit „Evolution Line" can only be used in combination with the specific engine mapping. It is technical wise not possible to use this specific engine mapping respectively the Akrapovič „Evolution Line" exhaust system on the public road.
All indicators need to get disconnected before the engine can be started.
Also the cruise control is deactivated.

Only applicable for 990 Duke R:
When installing the adapted engine mapping (EFI file) for the Akrapovic ""Evolution Line"", also another feature get`s enabled: Engine Brake Control (EBC).With this feature it is possible to increase or decrease the engine brake characteristics of the bike. It can be adjusted in 5 levels (-2 / -1 / Standard / +1 / +2).